Table of Contents
Usage Notice
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Introduction
About the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Package Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Installation
Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
User Controls
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
How to Use the OSD Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
On-Screen Display Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Appendix
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Warning Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Product Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Video Modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Touch Screen Driver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Support and Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
LA1710R, LA1710RTR and LA1710RTC User’s Guide (020-0320-02 Rev. A)
3
Usage Notice
WARNING – To prevent the risk of fire or shock hazards, do not
expose this product to rain or moisture.
WARNING – Please do not open or disassemble the product as this
may cause electric shock.
Precautions
Follow all warnings, precautions and maintenance as recommended in this
user’s guide to maximize the life of your unit.
Do:
❑ Turn off the product before cleaning.
❑ LCD front surface may be cleaned using a soft clean cloth
moistened with mild window glass commercial cleaners or
50/50 mixture of water and isopropyl alcohol.
❑ Use only high quality and safety approved AC/DC power adapter
that comes with your monitor.
❑ Disconnect the power plug from AC outlet if the product is not
used for an extended period of time.
Don’t:
❑ Do not touch the LCD display screen surface with sharp or hard
objects.
❑ Do not use abrasive cleaners, waxes or solvents for cleaning.
❑ Do not operate the product under the following conditions:
- Extremely hot, cold or humid environment.
- Areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- In direct sunlight.
4
LA1710R, LA1710RTR and LA1710RTC User’s Guide (020-0320-02 Rev. A)
Introduction
About Planar’s LA1710R / LA1710RTR / LA1710RTC
The LA17 products all have a 17" flat panel screen with an active matrix, thin-
film transistor (TFT) liquid crystal display (LCD).
Features include:
❑ Dual signal input: Analog VGA and Digital DVI-D
❑ Active matrix TFT LCD technology
❑ 1280 x 1024 SXGA resolution
❑ 8 ms GTG with RapidVideo™ Accelerator
❑ 17”viewable display area
❑ 31 ~ 80 kHz horizontal scan
❑ 56 ~ 75 Hz refresh rate
❑ 0.264mm x 0.264mm pixel pitch
❑ 350 cd/m2(typ.) brightness
❑ 1000:1(typ.) contrast ratio
❑ L/R=85°/85°,U/D=80°/80° viewing angle, CR=10
❑ Tr+Tf = 5ms (typ.) response time
❑ 4 CCFT backlight lamps w/50,000 hrs life (typ.)
❑ Auto-adjustment function
❑ Multilingual OSD user controls
❑ VESA DPMS power saving
❑ Durable touch screen
❑ VESA rear mounting 100mm x 100mm standard
LA1710R, LA1710RTR and LA1710RTC User’s Guide (020-0320-02 Rev. A)
5
Touch Screen for LA1710RTR
Resistive for finger interface
❑ Surface: Anti-glare treatment
❑ Interface: USB
❑ Durability: 35 million touches at a single point
❑ Hardness: 4H per ASTM D3363-92
❑ Operating force: Finger - < 50g average
❑ Transmissivity: 76% (typ.)
❑ Haze: 5%
❑ Clarity: 80%
❑ Driver: Windows® XP, Vista, Windows® 7
6
LA1710R, LA1710RTR and LA1710RTC User’s Guide (020-0320-02 Rev. A)
Touch Screen for LA1710RTC
Capacitive for finger interface
❑ Surface: Anti-glare treatment
❑ Interface: USB
❑ Durability: 225 million touches in a single location
❑ Hardness: Cannot be scratched using any stylus with Mohs’ rating of
less than 6.5
❑ Transmissivity: 88%
❑ Driver: Windows® XP, Vista, Windows® 7, Linux
LA1710R, LA1710RTR and LA1710RTC User’s Guide (020-0320-02 Rev. A)
7
Package Overview
LCD Display
Power Adapter
Power Cord
VGA Signal Cable
Landing Strip
Touch Screen Driver
Installation CD-ROM
(for LA1710RTR/
LA1710RTC)
USB Cable
(for LA1710RTR/
LA1710RTC)
“L”Bracket, 2 pcs
DVI Signal Cable
8
LA1710R, LA1710RTR and LA1710RTC User’s Guide (020-0320-02 Rev. A)
Installation
Product Overview
• Front View
LCD Display
• Rear View
Connector Ports “A”
Connector Ports “B”
LA1710R, LA1710RTR and LA1710RTC User’s Guide (020-0320-02 Rev. A)
9
• Connector Ports “A”
NOTE: Audio connector
has been removed in later
production versions.
• Connector Ports “B”
USB
(For LA1710RTR/LA1710RTC)
10
LA1710R, LA1710RTR and LA1710RTC User’s Guide (020-0320-02 Rev. A)
Connecting the display (Figure 1.1)
To set up this display, please refer to the following figure and
procedures.
1. Be sure all equipment is off.
2. Connect the DC power cord to the power connector. Plug one end of the
AC power cord into the power adapter, and the other end into an electrical
outlet(1).
3. For the PC with Analog graphics output: connect the VGA signal cable from
display VGA input connector to the 15-pin connector of your host computer
and tighten the screws(2).
4. For DVI-D output: connect DVI cable from display to the PC(2a).
5. For the LA1710RTR or the LA1710RTC touch screen models configure the
touch screen. Refer to the “Touch Screen Driver Installation”section on
page 25.
6. Turn on your computer, display and video source.
Notice: To ensure the LCD display works well with your computer, configure
the display mode of your graphic card, less than or equal to 1280
x 1024 resolution and make sure the timing of the display mode is
compatible with the LCD panel. “Video Modes”of this LCD panel are
listed in the appendices for your reference.
LA1710R, LA1710RTR and LA1710RTC User’s Guide (020-0320-02 Rev. A)
11
|
