Nokia Bluetooth Headset BH-904
9
3
4
1
5
2
6
7
8
9
10
ENGLISH
DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that
the products described in this document
without prior notice.
this HS-101W product is in compliance with Bluetooth is a registered trademark of
the essential requirements and other
relevant provisions of Directive 1999/5/EC. A
copy of the Declaration of Conformity can be
declaration_of_conformity/.
Bluetooth SIG, Inc.
To the maximum extent permitted by
applicable law, under no circumstances shall
Nokia or any of its licensors be responsible
for any loss of data or income or any special,
incidental, consequential or indirect
damages howsoever caused.
The contents of this document are provided
"as is". Except as required by applicable law,
no warranties of any kind, either express or
implied, including, but not limited to, the
implied warranties of merchantability and
fitness for a particular purpose, are made in
relation to the accuracy, reliability or
contents of this document. Nokia reserves
the right to revise this document or
withdraw it at any time without prior notice.
© 2009 Nokia. All rights reserved.
Nokia, Nokia Connecting People and the
Nokia Original Accessories logo are
trademarks or registered trademarks of
Nokia Corporation. Nokia tune is a sound
mark of Nokia Corporation. Other product
and company names mentioned herein may
be trademarks or tradenames of their
respective owners.
Reproduction, transfer, distribution, or
storage of part or all of the contents in this
document in any form without the prior
written permission of Nokia is prohibited.
Nokia operates a policy of continuous
development. Nokia reserves the right to
make changes and improvements to any of
The availability of particular products may
vary by region. Please check with your Nokia
dealer for details. This device may contain
commodities, technology or software
subject to export laws and regulations from
the US and other countries. Diversion
contrary to law is prohibited.
ENGLISH
Introduction
With the Nokia Bluetooth Headset
BH-904, you can make and answer
calls hands-free with your compatible
mobile device. The headset is provided
with a sliding boom that allows you to
talk at a lower volume or in a noisy
environment. Noise cancellation helps
you handle calls in noisy
Bluetooth wireless technology
Bluetooth wireless technology allows
you to connect compatible devices
without cables. The headset and the
other device do not need to be in line
of sight, but they should be within 10
metres (33 feet) of each other.
Connections may be subject to
interference from obstructions, such
as walls, or other electronic devices.
environments.
Read this user guide carefully before
using the headset. Also, read the user
guide for the device that you connect
to the headset.
The headset is compliant with the
Bluetooth Specification 2.1 + EDR
supporting the Headset Profile 1.1 and
Hands-Free Profile 1.5. Check with the
manufacturers of other devices to
determine their compatibility with
this device.
This product may contain small parts.
Keep them out of the reach of small
children.
Note: The surface of this
device does not contain
nickel in the platings. The
surface of this device contains stainless
steel.
ENGLISH
Get started
Warning: Use only chargers
approved by Nokia for use
with this particular model.
The headset contains the following
parts shown on the title page: volume
key (1), sliding boom (2), earpiece (3),
indicator light (4), power key (5),
charger connector (6), mute key (7),
answer/end key (8), and microphones
(9).
The use of any other types may invalidate
any approval or warranty, and may be
dangerous. Use of unapproved chargers
may present a risk of fire, explosion, or
other hazard.
Before using the headset, you must
charge the battery and pair the
headset with a compatible device.
When you disconnect the power cord of
any accessory, grasp and pull the plug,
not the cord.
Parts of the device are magnetic. Metallic
materials may be attracted to the device.
Do not place credit cards or other
magnetic storage media near the device,
because information stored on them may
be erased.
1. Connect the charger to a wall
outlet.
2. Lift the cover of the charger
connector, and connect the
charger cable to it (10). The red
indicator light is displayed during
charging.
Charge the battery
Before charging the battery, carefully
read “Battery and charger
information”.
Charging the battery fully may take
up 35 minutes with the AC-6
charger. Charging the battery with
ENGLISH
the AC-6 charger for 15 minutes
To check the battery charge when the
provides up to 5 hours of talk time. headset is not connected to a charger,
press the power key when the headset
is switched on. If the indicator light is
green, the charge level is sufficient. If
the light is yellow, you may need to
recharge the battery soon. If the light
is red, recharge the battery.
3. When the battery is fully charged,
the green indicator light is
displayed. Disconnect the charger
from the headset, then from the
wall outlet. Push the cover over the
charger connector.
When the battery charge is low, the
headset beeps every 5 minutes and
the red indicator light flashes.
To charge the headset with a
compatible Nokia charger that has a
2.0 or 3.5 mm charger plug, use the
Nokia Charger Adapter CA-146C (sold
separately).
Switch on or off
To switch on, press and hold the power
key for about 2 seconds. The headset
beeps, and the green indicator light is
displayed. The headset tries to
connect to one or two last connected
devices. When the headset is
connected to a device and is ready for
use, the blue indicator light flashes
slowly. If the headset has not been
paired with a device, it automatically
enters pairing mode.
To charge the battery through the USB
port of a compatible PC, connect one
end of the Nokia Connectivity Cable
CA-101 (sold separately) to the
charger connector and the other end
to the USB port.
The fully charged battery has power
for up to 8 hours of talk time or up to
160 hours of standby time.
ENGLISH
To switch off, press and hold the
If the headset has been previously
paired with a device, ensure that
the headset is switched off, and
press and hold the power key for
about 5 seconds until the blue
indicator light starts to flash
quickly.
power key for about 2 seconds. The
headset beeps, and the red indicator
light is briefly displayed. If the headset
is not connected to a device within 30
minutes, it switches off automatically.
Pair and connect the headset
Before using the headset, you must
pair and connect it to a compatible
device.
3. Activate the Bluetooth feature on
your device, and set it to search for
Bluetooth devices. For details, see
the user guide of your device.
You can pair the headset with up to
eight devices, but you can connect it
to only up to two devices at a time.
4. Select the headset from the list of
found devices.
5. If necessary, enter the passcode
0000 to pair and connect the
headset to your device.
1. Ensure that your mobile device is
switched on and the headset is off.
2. If the headset has not been
previously paired with a device,
switch on the headset. The headset
enters pairing mode, and the blue
indicator light starts to flash
quickly.
In some devices, you may need to
make the connection separately
after pairing.
When the headset is connected to at
least one device and is ready for use,
the blue indicator light flashes slowly.
ENGLISH
To manually connect the headset to
second device, make the connection in
one or two last used devices, press and the Bluetooth menu of the device.
hold the answer/end key for about 2
seconds (when no devices are
connected), or make the connection in
the Bluetooth menu of the desired
device. If you have a device connected
to the headset and want to connect a
You may be able to set your device so
that the headset connects to it
automatically. To activate this feature
in a Nokia device, change the paired
device settings in the Bluetooth menu.
Basic use
Change the earplug
Place the headset on the ear
The headset may be provided with
different sized earplugs. Select the
earplug that fits the best and is the
most comfortable for your ear.
Place the headset over your ear in a
comfortable position, and slide it
downwards (13). Gently push the
earpiece into your ear. Point the
headset toward your mouth.
To change the earplug, pull the
current earplug from the earpiece (11),
and push the new earplug into place
(12).
Sliding boom
The sliding boom brings the
microphone closer to your mouth,
which improves the audio quality
when you talk at a lower volume or in
ENGLISH
a noisy environment. You can use the call is in progress, press the answer/
boom to answer or end a call.
end key twice.
To use the boom, gently pull it down
To activate voice dialling (if your
toward your mouth (14), or push it up mobile device supports this feature
to its initial position (15).
with the headset), when no call is in
progress, press and hold the answer/
end key for about 2 seconds. Proceed
as described in the user guide of the
mobile device.
Adjust volume
The headset automatically adjusts the
volume according to ambient noise. To
manually adjust the volume, slide the
volume key up or down. To adjust the
volume quickly, slide and hold the key.
To answer a call, pull the boom
completely down toward your mouth,
or press the answer/end key. (For noise
cancellation, the boom has to be
completely pulled down.) To reject a
call, press the answer/end key twice.
The selected volume level is saved for
the device that you currently use with
the headset.
To end a call, push the boom up to its
initial position, or press the answer/
end key.
Calls
To make a call, use your mobile device
in the normal way when the headset is
connected to it.
To mute the microphone, slide the
mute key toward your mouth. To
unmute the microphone, slide the
mute key to the opposite direction.
To redial the number you last called (if
your mobile device supports this
feature with the headset), when no
ENGLISH
When you mute or unmute the
down for about 5 seconds. The green
microphone, the headset beeps twice. indicator light flashes twice.
To switch a call between the headset If the headset can connect to two
and a compatible connected device,
devices at the same time and you use
press and hold the answer/end key for redialling or voice dialling, the call is
about 2 seconds.
made on the device that you last used
to make a call when the headset was
connected to it.
Allow connection to two
devices
You can have the headset connected
to two devices at the same time.
Clear settings or reset
To clear all the pairing settings from
the headset, switch off the headset,
and press and hold the power key and
the answer/end key at the same time
for about 5 seconds. The headset
beeps twice, and the red and green
indicator lights alternate. After the
settings are cleared, the headset
enters pairing mode.
By default, the headset can only be
connected to one device at a time. To
allow the headset to connect to two
devices, switch off the headset, and
press and hold the power key, and
slide and hold the volume key up for
about 5 seconds. The blue indicator
light flashes twice.
To reset the headset if it stops
To allow the headset to connect to
only one device, switch off the
headset, and press and hold the power
key, and slide and hold the volume key
functioning, even though it is charged,
connect the headset to a charger, and
press the power key and the answer/
end key at the same time.
ENGLISH
the headset is charged, switched on,
and paired with the device.
Troubleshooting
If you cannot connect the headset to
your compatible device, check that
Battery and charger information
This device has an internal,
connect the charger, then disconnect and
nonremovable, rechargeable battery. Do reconnect it to begin charging the
not attempt to remove the battery from
the device as you may damage the
device. This device is intended for use
when supplied with power from the
following chargers: AC-6 and DC-6. The
exact charger model number may vary
depending on the type of plug. The plug
variant is identified by one of the
following: E, EB, X, AR, U, A,C, K, or UB.
The battery can be charged and
discharged hundreds of times, but it will
eventually wear out. Recharge your
battery only with Nokia approved
chargers designated for this device.
battery. If the battery is completely
discharged, it may take several minutes
before the charging indicator light is
displayed.
Unplug the charger from the electrical
plug and the device when not in use. Do
not leave a fully charged battery
connected to a charger, since
overcharging may shorten its lifetime. If
left unused, a fully charged battery will
lose its charge over time.
Always try to keep the battery between
15°C and 25°C (59°F and 77°F). Extreme
temperatures reduce the capacity and
lifetime of the battery. A device with a
hot or cold battery may not work
If a battery is being used for the first time
or if the battery has not been used for a
prolonged period, it may be necessary to
ENGLISH
temporarily. Battery performance is
particularly limited in temperatures well
below freezing.
Never use any charger that is damaged.
Operating times are estimates only.
Actual performance depends on many
factors such as device settings selected,
device features being used (or running in
the background), battery condition and
Do not dispose of batteries in a fire as
they may explode. Dispose of batteries
according to local regulations. Please
recycle when possible. Do not dispose as ambient temperature.
household waste.
Taking care of your device
Your device is a product of superior
design and craftsmanship and should be
treated with care. The following
suggestions will help you protect your
warranty coverage.
and electronic components can be
damaged.
•
Do not store the device in high or cold
temperature. High temperatures can
shorten the life of electronic devices,
damage batteries, and warp or melt
certain plastics. When the device
warms to its normal temperature
from a cold temperature, moisture
can form inside the device and
•
Keep the device dry. Precipitation,
humidity, and all types of liquids or
moisture can contain minerals that
will corrode electronic circuits. If your
device does get wet, allow it to dry
completely.
damage electronic circuit boards.
•
Do not use or store the device in
dusty, dirty areas. Its moving parts
•
Do not attempt to open the device.
ENGLISH
•
•
Do not drop, knock, or shake the
device. Rough handling can break
internal circuit boards and fine
mechanics.
The crossed-out wheeled-bin
symbol on your product, battery,
literature, or packaging reminds
you that all electrical and
electronic products, batteries,
and accumulators must be taken to
separate collection at the end of their
working life. This requirement applies in
the European Union. Do not dispose of
these products as unsorted municipal
waste. For more environmental
information, see the product Eco-
environment.
Do not use harsh chemicals, cleaning
solvents, or strong detergents to
clean the device. Only use a soft,
clean, dry cloth to clean the surface of
the device.
•
Do not paint the device. Paint can
clog the moving parts and prevent
proper operation.
These suggestions apply equally to your
device, charger, or any accessory.
Recycle
Always return your used electronic
products, batteries, and packaging
materials to dedicated collection points.
This way you help prevent uncontrolled
waste disposal and promote the recycling
of materials. Check product
environmental information and how to
recycle your Nokia products at
nokia.mobi/werecycle.
|
