Mellerware Blender 62002 User Manual

ECLIPSE STAINLESS STEEL BLENDER  
complies with  
INTERNATIONAL  
Model:  
6 2 0 0 2  
IEC60335  
SAFETY SPECIFICATIONS  
5 0 0 W  
PLEASE READ ALL INSTRUCTIONS BEFORE USE  
2 y e a r g u a r a n t e e  
MW_62002_Eclipse_IM.indd  
1
24/06/2011 15:30:58  
the plug from the power supply outlet, or to  
insert or remove the glass jar and/or lid.  
12. This appliance is not intended for use by  
persons (including children) with reduced  
physical, sensory or mental capabilities, or  
lack of experience and knowledge, unless  
they have been given supervision or  
(The switch does not permanently engage in the  
‘PULSE’ function. You have to hold the switch in  
the ‘PULSE’ (“M” position) or turn it repeatedly to  
the “M” position.)  
WARNING: DO NOT LEAVE THE APPLIANCE  
UNATTENDED WHILE IN OPERATION.  
instruction concerning use of the appliance by  
a person responsible for their safety.  
After using the blender, always turn the switch  
to the “0” position and remove the plug for the  
power supply outlet.  
Before first use  
All parts of the blender must be thoroughly  
cleaned before being used for the first time.  
To remove the glass jar simply remove it from the  
motor base. There is no need to rotate the glass  
jar to remove it.  
Assembling the Jar:  
1. Put the rubber sealing ring (5) on the inner  
edge of the blade unit (6).  
2. Put the blade unit with sealing ring into the cup  
base (7).  
3. Inset the ring (4) on the bottom of jar first, then  
Insert the assembled cup base onto the bottom  
of the jar (3) and turn clockwise to secure  
firmly in place.  
4. Secure the Measuring Cap (1) onto the Lid (2).  
5. Secure the Lid onto the Glass Jar and push  
down lid to clip into place.  
Useful tips:  
To achieve the best results when processing  
solid ingredients, place small portions of the  
specific food content into the glass jar piece  
by piece, instead of placing a large quantity all  
at once.  
• If you are processing solid ingredients, cut  
them into small pieces (2-3cm) first.  
• When mixing/blending solid ingredients start  
off first with a small amount of food content.  
Gradually add more and more food content  
through the opening in the lid.  
Inserting the Jar:  
• Always place your hand on top of the  
blender when you are operating the appliance.  
• For stirring solid or very thick liquid  
ingredients use the blender in “PULSE” mode  
(“M” position) to prevent the  
1. Ensure that the blender is switched off  
(Switch must be in the “0” position).  
2. Place the jar assembly (9) on to the motor  
base (8) and press down until securely  
engaged.  
blades becoming clogged.  
Instructions for Use  
Motor Base:  
1. Insert the food contents you wish to process  
into the jar.  
Never immerse the motor base in water. Wipe it  
only with a soft, clean damp cloth. For simple  
cleaning/ rinsing of the assembled glass jar:  
2. Place the lid on the jar and close securely.  
Place the measuring cap into the hole in the  
lid and turn clockwise to lock in place.  
3. Place your free hand firmly on the lid and  
apply a downward force before switching on  
the appliance. The appliance is fitted with a  
safety switch and requires the jar to be secured  
to the motor base in order for the appliance to  
operate.  
Empty the glass jar and fill it with clean water.  
Place the glass jar on the motor base and turn the  
switch several times to the “M” position. Empty  
the glass jar and rinse until clean.  
WARNING: THE JAR OR ANY PART OF THE  
JAR ASSEMBLY IS NOT TO BE CLEANED  
USING A DISH WASHER. USE OF A DISH  
WASHER MAY RESULT IN DAMAGE OF THE  
APPLIANCE AND THE WARRANTY WILL BE  
VOID.  
4. Set the switch to desired/required position e.g.  
“M”, “1”, “2”  
Speed setting Use  
“1”  
“2”  
for light usage with liquids  
for more solid consistency – for mixing  
liquids and solid food contents  
to stop operation  
SAVE THESE INSTRUCTIONS.  
“0”  
“M” for ice crushing & short, powerful  
impulse movements  
THIS PRODUCT IS FOR HOUSEHOLD  
USE ONLY!  
MW_62002_Eclipse_IM.indd  
3
24/06/2011 15:30:59  
27 Nourse  
Avenue Epping  
2
Cape Town  
P.O. Box 975 Eppindust 7475 South Africa  
Tel: +27 21 534 8114 Fax: +27 21 534 8086  
Service Centre Share Call: 086 111 5006  
w e b : w w w. c r e a t i v e h o u s e w a r e s . c o . z a  
MW_62002_Eclipse_IM.indd  
4
24/06/2011 15:30:59  

Proctor Silex 70100 User Manual
Pioneer VSX 1021 K User Manual
Panasonic DVC20 User Manual
Panasonic CQ C8803U User Manual
Panasonic AG DVX100 P User Manual
Orion 51463 User Manual
Nikon 4920 User Manual
Magenta MultiView Receiver NEC 600 User Manual
Kenwood KRC 608 User Manual
Kenwood DPX 3030S User Manual